Construction & IDC

PTG is committed to becoming a global technological leader in electrical safety products.
设备断路器,继电器插座,电涌保护器

Construction & IDC

As a key carrier of massive data and the core venue of informatization,the complexity,particularity and importance of data centers are self-evident,

IDC (Internet Data Center) is a fast-growing industry along with the development of internet, it is not only a data storage center, but also a data exchange center, a key carrier of mass data, a core place of informatization. It is always a critical place with complexities, particularities and heavy investments, as well as fragility. There are many types of accidents in the IDC, fire/equip damage/communication-interruption, caused by direct lightning strikes/ induced surge/ overvoltage, might lead to the irreparable huge losses. In view of its characteristics, PTG provides a tailored lightning and surge protection solution.


According to the IDC protection requirement of IEC 62305, in order to determine the categories of LPZ (lightning protection zone) and SPD selection/installation, the below items must be taken into consideration:

1. Lightning protection zone (LPZ 0…3);

2. Relative SPD test waveshapes (8/20 μs or 10/350 μs);

3. Voltage protection level

4. Voltage and standard of power supply (230/400 V; 400/690 V; TT/TN system);

5. Harmonic wave interference.



In accordance to:

1. IEC 62305: Protection against Lightning

2. IEC 61312: Protection against Lightning Electromagnetic Impulse

3. IEC 61643-11: Low-voltage Surge Protective Devices

4. IEC 61643-21: Surge protective devices connected to telecommunications and signaling networks - Performance requirements and testing methods

Related Products

  • Transformer

    T1 PTE 320-25W1-30R is used in 230/400 Vac TNC power supply system

    Integrated T1+T2 SPD
  • Main distribution cabinet

    T1 PTE 320-25W1-31R is used in 230/400 Vac TT power supply systems.

    Integrated T1+T2 SPD
  • Distribution cabinet/RPP

    T2 PE 385 - 40M2 - 31R is used in 230/400 Vac TT power - supply systems

    Modular T2 SPD
  • Final distribution box

    T2 PE 385-40M2-11R is used in 230/400 Vac single-phase TT power supply system

    Modular T2 SPD
  • Generator

    T1 PE 440 - 25W1 - 10R is used in IT or TNC power supply systems

    Integrated T1+T2 SPD
  • Network communication system

    PD J5-2X1000-4 and PD J48-2X1000-4 are used in Internet and PoE+ transmission systems.

    PoE+Network SPD
  • Control system

    PD LA-24W is used in the signal control system

    Modular Signal SPD
  • Lighting system

    T2 PE 275-40M2-11R is used in 230/400 Vac single-phase TT power supply systems。

    Modular T2 SPD
  • Video surveillance system

    The 2-in-1 PE 385-10W2-21/J5-2X100-2 is used for the protection of power supply and network cameras

    Power+Network Integrated SPD